Every card in Rivers and coasts, Year 10: river profiles, processes and landforms of deposition (River landscapes option)

long

HintIt describes the whole length of the journey, not a slice across it.

WhyThe long profile runs along the river; a cross profile cuts across it at one point. Geographers use the long profile to show how gradient changes, and cross profiles to show how the channel and valley change shape.

It starts steep and becomes gentler

HintSketch it and the curve looks like a playground slide.

WhyNear the source the river drops quickly through the hills. Further down the slope eases, and near the mouth the river is almost level. Drawn as a graph, the long profile is a smooth curve that is concave (it sags in the middle).

The channel becomes wider and deeper

HintTributaries keep joining, so there is more and more water to hold.

WhyIn the upper course the channel is narrow and shallow, and full of large rocks. Tributaries add water all the way down, and the bigger river erodes a bigger channel. In the lower course the channel is at its widest and deepest.

Interlocking spurs

HintFrom downstream they overlap like the teeth of a zip.

WhyA small upper-course river does not have the energy to cut through hard rock, so it flows around it. As it cuts downwards, the ridges it has gone around are left standing on each side in turn. Looking along the valley, they seem to lock together.

Very wide and almost flat

HintThink of the land you see from a train crossing a lowland river.

WhyIn the lower course the river erodes sideways, not downwards, and its meanders swing across the valley floor. Floods spread sediment over the level ground. The result is a broad flood plain with only low valley sides far apart.

Hydraulic action (also called hydraulic power)

HintThe first word names the fluid-driven brakes and lifts on machines.

WhyNo stones are needed: the power of the moving water does the work. It is strongest where the current is fastest, such as on the outside of a bend and at the foot of a waterfall. It is one of four kinds of river erosion, with abrasion, attrition and solution.

It is dissolved in the water

HintThink of sugar stirred into tea.

WhyRiver water is slightly acidic and slowly dissolves rocks such as chalk and limestone. That is erosion by solution. The minerals are then carried along invisibly in the water, which is transport by solution. You cannot see this part of the load.

vertical

HintThe opposite of horizontal.

WhyIn the upper course the river is far above sea level and flows down a steep slope, so it cuts downwards. This gives a narrow, steep-sided, V-shaped valley. Lower down, the river erodes mostly sideways.

Lateral erosion

HintThink of a crab's way of walking.

WhyIn the middle and lower courses a river has less height to lose, so more of its energy goes into cutting sideways. This is strongest on the outside of bends, where the current is fastest. It widens the valley floor and makes meanders grow.

traction; suspension

HintThe first is also the grip of a tyre on the road; the second is what a bridge hangs by.

WhyA river moves its load in four ways. Boulders are rolled along the bed, pebbles and sand bounce along it (saltation), fine particles are held up in the flow, and dissolved minerals are carried in solution. The fine particles are what turn a river brown after rain.

It slows down and loses the energy needed to carry it

HintThe water meets something that is hardly moving.

WhyA river needs energy to carry sediment, and its energy depends on how fast it flows. It also slows, and so deposits, on the inside of bends, in shallow water and when its volume falls after a flood.

A natural levee

HintFive letters, from the French verb meaning "to raise".

WhyEach time the river overflows, it drops sediment beside the channel. Over many floods the banks build up higher than the flood plain behind them. A higher bank lets the channel hold more water before it floods again.

The largest, heaviest sediment

HintAsk which particles need the most energy to keep moving.

WhyAs water leaves the channel it spreads out, becomes shallow and slows sharply. It can no longer carry coarse sand and gravel, so these fall at once, on the bank. Fine silt and clay stay in the water longer and settle further out across the flood plain.

alluvium

HintA Latin-looking word beginning with "all" and ending like "aquarium".

WhyLayer after layer of this silt builds the flood plain upwards. It is rich in minerals and holds water well, which is why flood plains make good farmland even though they flood.

Meanders moving sideways across the valley floor (lateral erosion)

HintThink about what the river's bends do to the land on either side over centuries.

WhyThe outside of each bend cuts into the edge of the valley, and the bends slowly shift position. Over a long time they wear back the valley sides and leave a broad, level floor. Floods then cover it with silt.

Mudflats

HintWading birds feed here at low tide, and your boots would sink in.

WhyWhen the water stops moving, even the finest silt and clay settle out. They build wide, level banks that are covered at high tide and uncovered at low tide. Plants may later colonise them to make salt marsh. They are an important habitat for birds.